Ang talikala usa ka kinahanglanon nga gamit sa rigging sa pagbayaw sa mga operasyon sa konstruksyon. Mahimo gamiton ang talikala aron makonektar ang mga pulley sa pag-alsa ug mga pirma sa lambuyog. Kini usa ka gaan ug nabag-o nga gamit sa koneksyon nga gigamit sa kadaghanan.Mga talikalamahimong bahinon sa bow talikalas ug U-shaped talikalas sumala sa ilang mga kinaiya sa panagway. Pinauyon sa katuyoan, adunay: mga kadena nga kadena, mga talikala sa angkla, ug mga naglutaw nga kadena.
(1) Ang kadenatalikala is a talikala used to connect the anchor chain. When in use, the horizontal bolt should be upward, and the horizontal bolt should be round to prevent it from rotating in the bolt hole and increase its strength. When using, first take out the horizontal bolt of the talikala, put the U-shaped buckle into the anchor chain ring to be connected, and then connect the horizontal bolt in series to an anchor chain ring above. In order to prevent the horizontal bolt from coming out, there is an oblique hole at each of the two ends of the horizontal bolt and the U-shaped buckle for driving the brake oblique pin. In order to prevent the oblique pin from coming out, a green lead seal should be inserted into the cavity left at the pin hole. Before the oblique pin is inserted into the pin hole, calcium-based grease should be applied to prevent rust.
(2) Angkla talikala is the talikala used to connect the anchor chain and the sinker, and the method of use is the same as the chain talikala.
(3) The floating talikala is the talikala used to connect the floating body and the anchor chain, and the method of use is the same as the chain talikala.